Smart phone flash tools popularly known ash SP flash tools,is design for MTK devices like Gionee, Tecno ,Infinix etc.this great tool allow you to flash your phone roms be it stock or custom roms,you will be able to unbrick your brick phone,install custom recovery,firmware update and flash stock for your
MTK device.
In this post i'm going to take you through the process of flashing roms using SP flash tools.
disclaimer: udemzytech won't be held responsible for any harm done to your device while doing this.
material needed:
1.SP flash tools download here
2.VCOM drivers download here
3.USB cable
4.Stock rom or custom for your smart phone
5.Laptop orDesktop
FLASHING WITH SP FLASH TOOLS
1.turn of your smart phone,remove the battery,sim card and SD card
if it's a non-removable battery,take out only your sim and SD card
2.install the VCOM drivers,to install
windows7 click here
windows8 click here
3.create a folder and put the SP flash tool and the stock or custom rom
extract the files with your PC extractor.
4.open the folder where you extract the SP flash tool and locate FLASH_TOOLS.
right click and choose run as administrator.
5.Once it is launched,click the SCATTER-LOADING button
6.it will display all your folders,now locate the folder you extract your stock/custom rom and click
on the scatter file,its usually a text file,click on it and allow it to load.
7.click the download button at the to right hand corner of the SP flash tool
when the screen looks faded,connect the USB cable to your smart phone.
a progression bar will show below,once the process is complete,a green OK circle will show.
8.close the SP flash tool and disconnect your phone from your computer.
If your phone bootloops, remove battery and boot into recovery mode by holding the power button
and volume up button,use the volume up+down to move and select factory reset.
scroll to yes and enter with the home key.
congratulations,your phone is now flash with the stock rom
MTK device.
In this post i'm going to take you through the process of flashing roms using SP flash tools.
disclaimer: udemzytech won't be held responsible for any harm done to your device while doing this.
material needed:
1.SP flash tools download here
2.VCOM drivers download here
3.USB cable
4.Stock rom or custom for your smart phone
5.Laptop orDesktop
FLASHING WITH SP FLASH TOOLS
1.turn of your smart phone,remove the battery,sim card and SD card
if it's a non-removable battery,take out only your sim and SD card
2.install the VCOM drivers,to install
windows7 click here
windows8 click here
3.create a folder and put the SP flash tool and the stock or custom rom
extract the files with your PC extractor.
4.open the folder where you extract the SP flash tool and locate FLASH_TOOLS.
right click and choose run as administrator.
5.Once it is launched,click the SCATTER-LOADING button
6.it will display all your folders,now locate the folder you extract your stock/custom rom and click
on the scatter file,its usually a text file,click on it and allow it to load.
7.click the download button at the to right hand corner of the SP flash tool
when the screen looks faded,connect the USB cable to your smart phone.
a progression bar will show below,once the process is complete,a green OK circle will show.
8.close the SP flash tool and disconnect your phone from your computer.
If your phone bootloops, remove battery and boot into recovery mode by holding the power button
and volume up button,use the volume up+down to move and select factory reset.
scroll to yes and enter with the home key.
congratulations,your phone is now flash with the stock rom
0 comments: